Site under construction.

 

Miscellanous Metals E to K in alphabetical order

 

As with all the steel data the following is a guide intended to identify a steel,
and if data available identify an electrode no warranteies are give,
any weld data provided should be conmed and welds for
critical applications always pre-qualified.

 

If you have steels that should be included please
send email ecraig@weldreality.com

Steels Description Preheat
Post heat 		 Chemistry OR
Weld data
Common ESCO alloys which are field welded
12C - 12E-
12F- 12G -
12M - 12T 		check with ESCO for specific weld heat treatment

preheat 200F

max interpass temp 500F

E7018
E70T-5
ESCO
12S-12K 		welding not recommended
ESCO 14 CABOT Ni Mang interpass temp 250F Lincoln Mangjet
ESCO 33G preheat 300F
Interpass temp min/max
550F		 SMAW
E410NiMo16
GMAW
ER410NiMo
ESCO
40L 		Max interpass 350F E308L-16
ESCO 40S Max interpass 350F E308-16
ESCO
45S 		Max interpass 350F E316-16
ESCO
45LR 		Max interpass 350F E317L-16
EX-TEN
42 to 70		 E7018
E70S-3/6
E71T-1
Galvanized E6012
E6013
E7016
dont use E70S-6 use E70S-3
GLX-W E60XX
E70XX
E70S-3
GLX-70W E8018-B2
GLX 60 /65W E8018-C3
GLX 45W/50W/55W E70XX
E70S-3
Gray Iron min preheat interpass 500F SMAW
Ni Rod 55
ENiFe-C1
Hastelloy-B weld to itself
ENiMo-7
Hastelloy-B2 gmaw
ERNiMo-7
Hastelloy-C ENiMo-2
Hastelloy-C4 ENiCrMo-7
Hastelloy-G USE short circuit ERNiCrMo-1
argon/helium
Hastelloy-B welded to Hastelloy -C SMAW
ENiMo-3
GMAW ERNiMo-6
Hi MAN STEEL E7018
   


Lamellar Tearing:
When welding, the weld shrinkage stresses impose tensile strains in the steel plate or on inclusions paralleled to the plate surface. The tensile strains can separate the inclusions causing cracks. Excessive strains can further elongate the cracks. Carbon, manganese and low alloy steels made at the mill with inadequate deoxidization are sensitive to lamellar tearing. The potential for lamellar tearing increases with the amount of inclusions in the plates being welded. Of special concern is when the inclusions are parallel to the plate surface. More data in ASTM A770 / A770M Standard Spec for through thickness tension testing of steel plates.

 

 

Steels Description Chemistry
weld data
Hi Steel E70XX
Hi Yield
- 42 -45-50-55 		E70XX
E70S-3
E71T-1
HK31A to AZ31B Magnesium alloys AZ61A
HK31A to HK31A Magnesium alloys EZ331
HM21A to AZ61B Magnesium alloys AZ61A
HM21A to HK31A Magnesium alloys EZ331
HP 9-4-20 Interpass 200F

TIG Argon
HP 9-4-20
HY80 E80S-2
ER100S-1
E1101X-M

joins HY 80 and Armour Plate
HY 100 ER120S-1
E11018M
HY 130 ER140S-1
E14018
IHX 45 to 70

E7018
E70S-3
E71T-1

 
INX 42 to 70 E7018
E70S-3
E71T-1
Inco Weld-A Ni70 Cr15 Mn2 Mo1.5 Nb1.8 ENiCrFe-2
Inconel Weld-A to Incoloy /stl/stain/nickel 200 monel
Inco- B Ni70 Cr15 MnMo Nb2.5
ENiCrFe-4
Incoloy ASME group for base metals is P45
Incoloy 65
ERNiFeCr-1
BS 2801 - NA41		 Ni42 Cr 21 Ti 1 Mo3
Filler for TIG Incoloy 825

Incoloy 135
DIN EL NiCr28Mo

 Ni36 Cr29 Mo3.8 Mn2 Cu 1.8 135 SMAW
dcrp for welding Inco 825
  

 

 

 

Incoloy 800 to stainless plus 5to 9% nickel or carbon stl   Smaw Inco A for MIG 82
Incoloy 825 to same
Incoloy 135 - 800 - 801 to same		    Inco 112
Incoloy 800 to Cu and Cu Nickel    Smaw Nickel 141
MIG Nickel 61
Incoloy 825 to stain and steel   Smaw ENiCrMo-3
Inco 112
MIG 625
Inconel ASME group for filler metals is F43 base metal is P43
Inconel 62 ERNiCrFe5
this is filler wire for Inco 600		 Ni 74%
Cr 16%
Inconel 82
ERNiCr-3
A filler for dissimilar metals		 Ni 72%
Cr 20%
Inconel 82 Inco alloys to Ni200, Monel alloy 400 to stain or carbon steel,
Inconel 92
A filler wire
ERNiCrFe-6
F43		 Ni 71%
Cr 16.4%		 for welding dissimilar metals austenitic monel high Ni 9%Ni

Inconel 112
SMAW electrode ENiCrMo-3
DIN 1736
EL NiCr20Mo9Nb

 Ni 61%
Cr 21.5 %
Mo 9
Nb3 		To weld Inconel 625 - 601 - 800 - 801 and dissimilar metals
Inconel 117
SMAW electrode
DCRP
ENiCrCoMo1
DIN 1736
EL NiCr21Co12Mo

Ni 52%
Cr 23%
Co 12
Mo 9

 

 to weld Inconel 617 - 600 - 601 - 800H -802 - HP - HP45 -HK40

Inconel 132
SMAW electrode
dcrp
ENiCrFe-1

Ni 73%
Cr 15
Nb 2.1

 weld 600-601 / HA 330 / Inconel Incoloy to steels and nickel


Inconel 182
ENiCrFe-3
DIN SG NiCr20Nb
BS 2901 NA33		 Ni 67%
Cr 14
Mn 7.8 		A smaw electrode dcrp for 600 - 601 alloy

Inconel 601
DIN SG NiCr23Al

 

filler metal

 
Inconel 625
ERNiCrMo3
DIN NiCr21Mo9Nb
BS 2901 NA43		 Ni 61%
Cr 21.5
Cb 3.6
Mo 9
A MIG TIG Filler for 625 and 601
Inconel 625 welds Incoloy 802 plus 9% Ni and dissimilar
Inconel 600 600 to same use Inco 182 ErNiCr-3
Inconel 601 / 625 weld 601 / 625 to same Inco 112
Inconel 718
DIN NiCr19NbMoTi		 for 718 / 706 / x -750
Inconel 600 / 601 to stainless and steel use SMAW Inco -A
mig Inconel - 82
Inconel 600 / 601 to 5 - 9% Nickel
SMAW Inco A
MIG - INCONEL 82
Inconel 600 / 601 to Cu- Cu Nickel
SMAW ENi-1 ,
Nickel - 141
MIG Ni-61
Inconel 625 / 706 /718 /X50 to stainless and steel SMAW ENiCrFe-2
Inco A-82
Inconel 625 / 706/718 /X-50 to Cu - Cu Nickel ENi-1
Nickel 141 (61)
Inconel 625 / 706 / 718 /X-50 to 5-9% nICKEL SMAW Inconel 112
MIG Inco 625
Inconel 617 weld 617 to same use Inco 117
Inconel 718

Ni 52.5%
Cr 18.6
Cb 5%
Mo 3.1

 

 MIG/TIG Filler?
Inconel X-750 MIG /TIG
Inconel 718 ERNiFeCr2
INX STEEL E60XX E70XX
E70S-3 or 6
E70T-1 / E71T1
Jalloy 100 - 110 ER120S-1
Jalten E70S-3 or 6
E70T-1 / E71T1
Jalloy -S E11018
Kaisaloy 42 - 45 - 50 - 55 Cv E70S-3 or 6
E70T-1 / E71T1
Kaisaloy 60SG -
60 CV		 E8018-C3
“Kaisaloy 70Mb” E8018-B2