for tacking small fuel parts laser ot TIG”

Home › Forums › Weld Forum › for tacking small fuel parts laser ot TIG”

Viewing 1 post (of 1 total)
  • Author
    Posts
  • August 1, 2006 at 8:01 pm #71
    admin
    Keymaster

    eD

    We manufacture fuel injector parts that once tacked get brazed. To hold the parts we are going to either use a robot with a laser or TIG Which process would ypu recommend?

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.